.. include:: aliases.rst Delinquency Transactions ======================== Create Delinquency ------------------ Through this function you process delinquencies. From the menu bar, select **Billing>Calculations>Create Delinquency**. The Create Delinquency dialog box displays. |image479| \ **Figure 371:** \ **Create Delinquency** - **Limit options**. Select the desired limit options. Refer to Getting Started> Common Functions—Limit Options - **Location/Customer.** Click **Browse** and, from Search for the desired location. *Refer to Getting Started>Searching for instructions on searching.* To remove the selections in the *Location* and *Customer* fields, click **Clear** - **Search routes.** Click **Select Routes**. In the Select Routes dialog box, click the applicable route. Then click **OK**. To remove all routes selected, click **Clear** - **Search cycles.** Click **Select Cycles**. In the Select Cycles dialog box, click the applicable cycle. Then click **OK**. To remove all cycles selected, click **Clear** - **Bill group.** Click **Browse** and, from Search for the desired bill group. *Refer to Getting Started>Searching for instructions on searching* - **Code Filters**. Click **Add** |image480| and add the desired code filter(s). Refer to *Getting Started>Code Filters* for details on making a selection in this portion of the dialog box - **Delinquency type.** Click the drop-down list arrow and select the type of delinquency to process: Penalties, Interest, Shutoffs, Bad Debt Write-Offs, Collection Sold, Lien Creation, or Lien Write-offs - **Shutoffs.** Customers can be alerted to the Shut Off date with an automated phone system. Refer to the section entitled, **AMS Call Interface**. Click **Create Work order**. Refer to the section entitled, *Create Work Orders from Shutoffs* - **Bad Debt Write-Offs**\ *.* In the *Minimum past due balance* field, type the dollar amount balance that must be passed due to create a delinquency - **Collection Sold.** Click the **Collection Data** button. *Refer to the section entitled>Collections Sold Data* - **Transaction date.** Click the drop-down list arrow and select the applicable date - **Charges due before**. Click the drop-down list arrow and select the applicable date. The Charges due before date MUST be at least one day after the Due Date. You may also choose to indicate the days past due in lieu of a date. If billing is done monthly and charges should only be created for those customers with two bills past due, enter a date that is 60 days prior to the Transaction Date. - **Days past due.** Type the number of days past due that apply to the delinquency type. You may also choose to select a date before which charges are due - **Include Unposted Payments.** When selected, will include any unposted payments made - **Action.** Click the drop-down list arrow and select the desired processing action: Calculate, Review Calculations, Delinquency Edit List, Post, Preview Register Detail, Preview Condensed, or Preview Register Summary - **Sort options.** Click the drop-down list arrow and select the desired sort option: *Account No., Location No., Name, Zip Code,* or *Route + Read Sequence* - **Process.** Click **Process**. The processing takes place in the background and the screen refreshes - Select another limit option to work with, or click **Close** to exit the dialog box Post and Create Miscellaneous Statements ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Some delinquency types allow immediately creating a miscellaneous statement upon posting (if the company option has been enabled). These types are Penalty, Interest, Shutoff, and Lien Creation. After selecting the Post action, click "Create misc. statement" and enter a due date for the miscellaneous statement. This process will: - Post each delinquency - Create a miscellaneous statement for each posting - Assign the selected due date to each miscellaneous statement - Flag each new miscellaneous statement as printed - If automatic customer communication is enabled, any customers enrolled in an automatic communication preference will be sent a statement using the subscribed automatic methods. Create Work Orders from Shutoffs ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ When working with the Create Delinquency function, if the Delinquency type of *Shutoff* is selected, it is necessary to create a work order. To display this dialog box, do the following: - While viewing the Create Delinquency dialog box, move to the *Delinquency type* field - Click the drop-down list arrow, select **Shutoff** - Click **Create Service Order**. The Create Service Orders from Shutoffs dialog box displays |image481| \ **Figure 372:** \ **Create Work Orders From Shutoffs** - **Issue date and time.** By default, the current date/time is displayed. This field cannot be edited - **Items to include.** Species whether *metered*, *non-metered*, or *both* should are to be included on this work order. Click the drop-down list arrow, and select the desired choice - **Process date.** Specifies the date on which the work order is to be processed. Click the drop-down list arrow and select the applicable date - **Process time.** Specifies the time at which the work order is to be completed. Click in the field and type in the time. Press tab to move between the various components of the time (e.g., hours, minutes, AM/PM) - **Include shutoffs.** Indicates the date range for which to include shutoffs. In the *From* and *Through* fields, click the drop-down list arrow and select the applicable date - **Assigned to.** Click the drop-down list arrow, and select the desired choice - **Category.** Indicates the category for this work order. Click the drop-down list arrow, and select the desired choice: *All, None, Reconnect, Repair, Reread,* or *Shutoff* - **Comments.** Type any comments related to this work order. This is a free-form text field and any combination of letters, numbers, and symbols may be entered - **Work order task details.** All available services are shown under the *Services* column. Click in the *Code* column, and select the desired code for this work order - **Action.** Click the drop-down list arrow and select the desired option - **Create work orders.** When selected, generates all the work orders for the location related to the shut off. For example, if shut off involves reading the meter and then shutting it off, two work orders are generated - **Review work orders** opens a dialog box in which you can view all work orders that were generated - **Preview work orders.** Prints all the existing work orders generated Collection Sold Data ~~~~~~~~~~~~~~~~~~~~ Through this dialog box, you enter all the information regarding collection of a debt. To display this dialog box, do the following: - While viewing the **Create Delinquency** dialog box, move to the *Delinquency type* field - Click the drop-down list arrow, select **Collections Sold** - | Click **Collection Data**. The Enter Collection Sold Data dialog box displays | |image482| Figure 373: Enter Collection Sold Data - **Include.** Indicates what to include in the collection data: *Current, Final,* or *Currents & Finals* - **Purchasing company.** Specifies the name of the company that is purchasing this debt for collection. Type the name in the field - **Contact.** Specifies the name of the person at the purchasing company. Type the contact name in the field - **Address.** Specifies the address for the purchasing company. Click **Browse**, and complete the Setup Location Address dialog box. *Refer to File Menu: New Customers—Customer Maintenance* - **Sales percentage.** Indicates the percentage your company receives from any amount collected by the purchasing company. Type a percentage in the field - **Sold date.** Indicates the date this debt was sold. Click the drop-down list arrow and select the applicable date - **Comments.** Type any comments about this debt. This is a free-form text field and any combination of letters, numbers, and symbols may be entered - Click **OK**